In accordance with §11 PAngV (German ordinance regulating the indication of Prices), the last offer price shows the lowest price of the last 30 days after all usual direct discount deductions. Discounts such as cashback or trade-in, which are calculated or paid out after the purchase or by third parties without a contractual relationship with Hifi Foto Koch GmbH (service providers, agencies, manufacturers, etc.) or which require further action, are not included.
Application type:
ILFORD GALERIE Creative Emulsion is a water-based coating solution for creating inkjet printing papers from uncoated art papers. The inkjet receptive layer is applied manually and increases the maximum ink absorption and scratch resistance of the print substrate. This increases the maximum color density and sharpness of the printout.
Properties:
ILFORD GALERIE Creative Emulsion is available in two different versions:
Blend A and Blend B.
The two emulsions have different coating properties.
Blend A prevents the ink from running on the paper, which improves the color density and sharpness of the image without affecting the texture and color tone of the paper.
Blend B increases the ink absorption and scratch resistance of the applied coating.
At the same time, the surface is smoothed and the white tone of the paper is increased. The achievable maximum density is higher than when using Blend A.
It is recommended to experiment with both blends to obtain the individually desired appearance of the inkjet print.
ILFORD GALERIE Creative Emulsion can be applied to many different types of paper, such as washi, rice, bamboo and cotton paper, etc.
It can be used for printing systems with dye inks as well as pigment inks.
Instructions:
MixingBlend A and Blend B
We recommend using 100% Blend A to maintain the original texture and color of the art paper.
To improve the maximum density, increase the proportion of Blend B in the mixture - this can lead to changes in the texture and color tone of the paper.
The higher the proportion of Blend B, the more scratch-resistant the coating will be and the highest possible color density will be achieved.
Shake the bottles well before mixing. Simply pour Blend A and B together as required
Coating method:
We recommend using the ILFORD GALERIE Accessories squeegee for coating.
Please refer to the table below for the recommended coating thickness, as the
mixing ratio of the solutions is decisive for this.
1.
Fix the paper to be coated on a flat and smooth surface that is larger than the paper.
2.
Pour the desired amount of emulsion onto the upper end of the paper parallel to the squeegee.
3.
Any air bubbles that may appear in the solution are unproblematic.
4.
Now immediately pull the squeegee over the entire paper in one go. This process should take one to two seconds with A4 size paper.
5. Then allow the coating to dry for at least 3 hours under normal room conditions. The drying time can be shortened by applying hot air (e.g. with a hair dryer).
Increase the amount of solution if there are irregularities or uncoated areas, as well as insufficient scratch resistance on the surface.
It is possible to apply a second coat after the first coat has dried.
Increase the amount of solution if there are irregularities or uncoated areas, as well as insufficient scratch resistance on the surface.
It is possible to apply a second coat after the first coat has dried.
Note:
Shake bottles well before use - especially if there are hard or settled components.
ILFORD GALERIE Creative Emulsion Blend A
Opacity:: white transparent liquid
pH: 6 - 6.5
Solids content: 14%
Viscosity: 50 - 100m Pa-s
ILFORD GALERIE Creative Emulsion Blend B
Opacity:: white liquid
pH: 6 - 6.5
Solids content: 23%
Viscosity: 900 - 1400m Pa-s
Application type:
ILFORD GALERIE Creative Emulsion is a water-based coating solution for creating inkjet printing papers from uncoated art papers. The inkjet receptive layer is applied manually and increases the maximum ink absorption and scratch resistance of the print substrate. This increases the maximum color density and sharpness of the printout.
Properties:
ILFORD GALERIE Creative Emulsion is available in two different versions:
Blend A and Blend B.
The two emulsions have different coating properties.
Blend A prevents the ink from running on the paper, which improves the color density and sharpness of the image without affecting the texture and color tone of the paper.
Blend B increases the ink absorption and scratch resistance of the applied coating.
At the same time, the surface is smoothed and the white tone of the paper is increased. The achievable maximum density is higher than when using Blend A.
It is recommended to experiment with both blends to obtain the individually desired appearance of the inkjet print.
ILFORD GALERIE Creative Emulsion can be applied to many different types of paper, such as washi, rice, bamboo and cotton paper, etc.
It can be used for printing systems with dye inks as well as pigment inks.
Instructions:
MixingBlend A and Blend B
We recommend using 100% Blend A to maintain the original texture and color of the art paper.
To improve the maximum density, increase the proportion of Blend B in the mixture - this can lead to changes in the texture and color tone of the paper.
The higher the proportion of Blend B, the more scratch-resistant the coating will be and the highest possible color density will be achieved.
Shake the bottles well before mixing. Simply pour Blend A and B together as required
Coating method:
We recommend using the ILFORD GALERIE Accessories squeegee for coating.
Please refer to the table below for the recommended coating thickness, as the
mixing ratio of the solutions is decisive for this.
1.
Fix the paper to be coated on a flat and smooth surface that is larger than the paper.
2.
Pour the desired amount of emulsion onto the upper end of the paper parallel to the squeegee.
3.
Any air bubbles that may appear in the solution are unproblematic.
4.
Now immediately pull the squeegee over the entire paper in one go. This process should take one to two seconds with A4 size paper.
5. Then allow the coating to dry for at least 3 hours under normal room conditions. The drying time can be shortened by applying hot air (e.g. with a hair dryer).
Increase the amount of solution if there are irregularities or uncoated areas, as well as insufficient scratch resistance on the surface.
It is possible to apply a second coat after the first coat has dried.
Increase the amount of solution if there are irregularities or uncoated areas, as well as insufficient scratch resistance on the surface.
It is possible to apply a second coat after the first coat has dried.
Note:
Shake bottles well before use - especially if there are hard or settled components.
ILFORD GALERIE Creative Emulsion Blend A
Opacity:: white transparent liquid
pH: 6 - 6.5
Solids content: 14%
Viscosity: 50 - 100m Pa-s
ILFORD GALERIE Creative Emulsion Blend B
Opacity:: white liquid
pH: 6 - 6.5
Solids content: 23%
Viscosity: 900 - 1400m Pa-s
When creating your customer opinion and/or uploading media (e.g. images, videos, audio files, texts, documents, etc.), please observe our guidelines:
Each customer opinion is editorially checked before publication. Please ensure, among other things, that
By submitting your customer opinion and/or uploading media, you agree to these guidelines and terms of use.
These terms of use apply to the participation in and use of the customer ratings of Hifi Foto Koch GmbH. In the event of conflicts with the general terms and conditions or data protection regulations, these terms of use shall take precedence.
By submitting a customer rating and/or an upload of media (e.g. pictures, videos, audio files, texts, documents etc.) you assure that
You provide your content free of charge and are not entitled to any form of remuneration or compensation. There is no entitlement to publication.
Submitted customer opinions and uploaded media are usually reviewed and published within a few working days. All transferable rights of use of the content provided by you are transferred to Hifi Foto Koch GmbH and its current or future partners and representatives (including but not limited to affiliated companies, service providers, search engines, employees, agencies, branches, joint ventures, suppliers). The content may be used, modified and published by the aforementioned parties at their own discretion without any restrictions in terms of time, content and location. Promotional use is also permitted. The content may be edited or deleted if it violates the guidelines for ratings and community media as well as these terms of use or if it makes sense for the respective purpose. It is also possible to shorten the content at any time and without giving reasons.
Hifi Foto Koch GmbH and its current or future partners and agents do not warrant the ability to modify or delete the content you submit, should you wish to do so.
You transfer the rights and licence of your content to Hifi Foto Koch GmbH and its current or future partners and representatives. You grant Hifi Foto Koch GmbH and its current or future partners and representatives, the unrestricted right to your customer opinion (rating text, nickname, star rating, recommendation, etc.) as well as to your media (e.g. images, videos, audio files, texts, documents, etc.; incl. the indication of the author, description, etc.) to use, change, store, delete, shorten, modify, adapt, translate, copy, pass on, sell and distribute worldwide in any form, any medium, in any technology. Personal data (e-mail address, address, contact details) will not be passed on to third parties.
You assume full responsibility for your content. You agree to indemnify Hifi Foto Koch GmbH and its current or future affiliates and agents for all costs, including attorneys' fees, any damages, consequential damages of any kind, claims and demands arising from your failure to comply with the Review and Community Media Guidelines and these Terms of Use.
By submitting your customer opinion and/or uploading media, you agree to the Review and Community Media Guidelines and Terms of Use. By providing your email address, you agree that Hifi Foto Koch GmbH and its current or future partners and agents may send you status information of your customer opinion by email.
Data protection notice
When using the homepage including the submission of ratings and the upload of media, so-called personal data is processed by HiFi Foto Koch GmbH in the sense of Article 6 paragraph 1 DSGVO. Personal data is information that can be directly or indirectly assigned to you or can be assigned to you. In addition to the information entered by you, such as the name, e-mail and description, this data can also be data related to your customer account, IP addresses, access times, accessed URL, sources, browsers used, operating systems and devices, the name of your access provider as well as others. A full overview of data processing and privacy information can be found at https://www.fotokoch.lt/privacy.html.